Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pelco fire panel
#1
Anyone worked on one before? Found a bit of info but appears to use system sensor or intellia protocol which looks like apollo. What's it like getting hold of software and commissioning etc?
Cheers
Whistle Admit to nothing, deny everythingWhistle
Reply
#2
Beening the grass I am , I believe graham has some info about pelco panels might be worth buying him a coffee or two he may have manuals ?
Reply
#3
They run a tweaked XP95 protocol. I might have manuals on my work PC.

Total pain to source parts and buy
All posts are of my own opinion and knowledge and do not reflect the views of the Company I work for.
Reply
#4
If you've got anything that'd be ideal mate. No idea why someone would spec some random panel in the middle of Edinburgh is beyond me.
Whistle Admit to nothing, deny everythingWhistle
Reply
#5
I will have a look tomorrow mate. If its Edinburgh then there is a fair chance it was installed by Electra-com who were agents . They got bought out by Scotshield , who have now been bought by SPIE.

I get lots of folk forgetting to hold the reset button in for a few seconds to take effect.
All posts are of my own opinion and knowledge and do not reflect the views of the Company I work for.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Why are Fire alarm engineers so short.. ConTRo13r 5 276 14-07-2017, 09:32 AM
Last Post: Will Lloyd
  Fire Curtains ESP 3 157 07-07-2017, 10:03 AM
Last Post: ESP
  photain old panel key Dayo 0 112 01-07-2017, 10:13 AM
Last Post: Dayo
  ADT fire interface resistor values Falcon 5 344 03-06-2017, 12:03 PM
Last Post: bob1
  OEM panel? Kibeth 0 159 19-05-2017, 08:38 PM
Last Post: Kibeth
  Panel mounting heights Clarkie 22 1,035 14-05-2017, 04:02 PM
Last Post: zenengineering
  Morley master / slave setups - slave panel download jockney 5 428 12-05-2017, 03:15 PM
Last Post: jockney
  Fire Keywords Amarcellin 3 273 21-04-2017, 10:16 PM
Last Post: Ghostrider
  The need for Qualified Fire Alarm Technicians Explained in 9 Minutes Will Lloyd 64 3,354 10-04-2017, 08:36 AM
Last Post: Will Lloyd
  Fire Brigade response kevin hynes 6 413 06-04-2017, 01:27 PM
Last Post: bob1

Forum Jump:


Users browsing this thread: 1 Guest(s)