Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
automatic doors and ADSA
#1
afternoon, we engineers have been told we now look after automatic sliding doors as well as all the fire and security stuff and there is some confusion over what training is needed to work on these systems. do you need to be ADSA qualified? Is there anything legally you have to do before you work on them? We've been told we will get training but I severely doubt it!

https://www.adsa.org.uk/
Reply
#2
Not under the fire regs I would have thought. I looked after some automatic doors but didn`t have any training was easy really
Peter Robinson




07889 038650

Reply
#3
I looked into this a few years ago for powered openers and if I remember rightly (and this may have be different for sliders) but i think it depends on the power of the door. There are different levels of power, and if the door is a high power, you need specific competency certification.
www.ajfire.co.uk

"Independent BAFE Accredited Fire Protection Specialists"

- SP203-1; FDA Maintenance; 
- SP205-1; Life Safety Fire Risk Assessment
- Members of the Fire Industry Association (FIA)
- SafeContractor Approved


Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Fire Escape doors with a lock. Chris12345 3 479 12-03-2020, 09:12 PM
Last Post: AnthonyB
  Fire doors closing not immediate luggsey 3 1,115 02-05-2019, 02:53 PM
Last Post: luggsey
  Maglock reducing height of fire escape doors alonso 0 864 28-09-2018, 09:18 AM
Last Post: alonso
  mcp's near roller shutter doors Rubble1952 7 4,705 27-07-2015, 09:08 AM
Last Post: Will Lloyd
  smoke detector proximity to hold open doors kershawfire 8 10,113 22-04-2013, 05:35 PM
Last Post: kershawfire
  Automatic Fire Door Detection Ferret 5 6,890 20-01-2011, 10:12 PM
Last Post: Ferret

Forum Jump:


Users browsing this thread: 1 Guest(s)