Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
protec cirrus pro 100 software
#1
anyone got the software? or do we have to bow down to the great god of protec?!?!?!?!?
Reply
#2
Got one of these myself just came into fault this morning.

You can do quite a bit with them front end (Fault identify etc) but think it would probably need software to do much else.
Reply
#3
Apparently the software is £375 including the lead and needs no dongle.
Reply
#4
Ouch! I think Id prefer to stick a VESDA in :)
Reply
#5
(14-01-2020, 07:17 PM)zenengineering Wrote: Ouch! I think Id prefer to stick a VESDA in :)

Completely different product

Reply
#6
(21-01-2020, 10:24 PM)Beagle Wrote:
(14-01-2020, 07:17 PM)zenengineering Wrote: Ouch! I think Id prefer to stick a VESDA in :)

Completely different product


How so Beagle?
Reply
#7
Different detection technology.

Cirrus pro uses a cloud chamber principle to detect sub-micron particles so can be set to detect incipient fire risks at a much earlier stage.

What probs you having zen?  If you are getting airflow faults I could suggest that if all the sample points are clear and unblocked and the pipework is sound, check the sensor at the top of the manifold and brush off any dust (powered down first) maybe treat it to a little vacuum lol.

You need software if you want to recalibrate etc if you are adding to or removing from the system, for general maintenance you shouldn’t be needing to do that.

Hope that helps at all

Reply
#8
get the manual off the protec website the panel can be used to tellyou the fault by flashing l e d s. hope that helps .
Reply
#9
(14-01-2020, 07:17 PM)zenengineering Wrote: Aww Ouch! I think Id prefer to stick a VESDA in :)

I am with you there zen, they all do much the same just in different ways some manufacturers are better at it than others and to make comparisons difficult protect use particles per cc and xtralis use %/m....... how many sites have it set that low anyway?
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Morley DXC Software Clarkie 4 1,156 01-01-2020, 12:38 PM
Last Post: shrikant
  Kentec Synchro hochiki Loop Explorer Software jmsa7 3 2,886 05-10-2019, 09:17 PM
Last Post: Ali Sulaiman
  Protec Interface Next4467 11 1,774 20-08-2019, 05:12 PM
Last Post: Next4467
  Fire Detection System Design Software Pro Metheus 0 766 16-06-2019, 04:37 PM
Last Post: Pro Metheus
  Protec Labels mr ab 4 965 03-03-2019, 10:23 AM
Last Post: mr ab
Question Fireline MAG Pro - Software & UDL Lead Dan 21 4,330 11-01-2019, 10:42 PM
Last Post: Dan
  Kentec software corrupting files Stevem 34 13,797 22-11-2018, 09:57 PM
Last Post: yangi19
  Protec 5200 Fire98 6 1,657 04-11-2018, 03:40 PM
Last Post: hothead
  Zeta Premier 4-Loop panel config and software ggiannopoulos 0 1,126 26-09-2018, 02:20 PM
Last Post: ggiannopoulos
  Voyager panel software designguru 2 1,281 21-08-2018, 07:30 PM
Last Post: sparky999

Forum Jump:


Users browsing this thread: 2 Guest(s)