Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chubb panels, late 1980s
#1
What panels would Chubb have been fitting in the late 1980s? Around four zones
Reply
#2
Chubb ZoneMaster? I believe Kentec manufactured them.
Nothing is foolproof to a sufficiently talented fool...   24

Reply
#3
I'm trying to work out, only because it's annoying me, what panel could have been fitted before having been replaced a few years ago. From marks on the wall it either had a small separate PSU, less than a foot wide, or the panel itself was this small
Reply
#4
Chubb also used to use Protector Alarms panels.

They're extinct no , but you used to see a lot of their suppression panels about. Beige sort of colour with yep Tok keys on the front one to enable controls, one to set the mode. The standard conventional panels maybe only had one , I can't remember now. 

They had a savwire version with no way to disable sounders except by switching the zone to conventional, which could be done via either a jumper or a switch for each zone (can't remember which now) 

Door opened with a Morley /Advanced key. 

They definitely had one that was pretty small less than a foot wide. 
Strangely, their smaller panels tended to be taller and the bigger ones tended to be wider.

Edit found a picture.


Attached Files Image(s)
   
Reply
#5
Protector, Kentec, and Zettler. Zonemaster panels. Also, the old Black panels, M10 range, and TWM. They were conventional and extinguishing panels.
Reply
#6
For addressable, early Morley, Hochiki panels, Kidde...  

Chubb Extinguishers from the 80's 



Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Linking 3 panels ted89 11 1,835 26-02-2019, 08:37 AM
Last Post: Royce44
  55000-741 apollo VAD and morley panels alonso 7 2,889 10-10-2018, 06:21 PM
Last Post: sparky999
  Chubb Controlmaster 320a lookupmenumber 16 20,814 18-01-2018, 05:41 PM
Last Post: pfc_0397
  Tyco ADT MXC Panels linked together destix 12 13,038 28-07-2017, 06:17 PM
Last Post: sacred
  Power Supplies for FA panels goodie 2 2,604 16-11-2015, 09:15 PM
Last Post: S Kelly
  Chubb Panels designguru 6 7,501 28-07-2015, 08:48 AM
Last Post: Tilly
  chubb zonemaster 404 peppy 8 7,025 22-04-2015, 07:23 AM
Last Post: alonso
  Linking Conventional Panels clarkson 10 9,570 20-06-2014, 12:12 AM
Last Post: Monkeh
  Chubb controlmaster110 codes Monkeh 2 3,135 17-06-2014, 12:38 PM
Last Post: Monkeh
  Chubb zonemaster 404 alonso 2 4,462 27-05-2014, 06:58 PM
Last Post: Tilly

Forum Jump:


Users browsing this thread: 1 Guest(s)