Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clarkson Sprinkler Controller
#1
Does anyone know where I can purchase or have a data sheet the following :-

Clarkson ST3 1289 intelligent sprinkler controller 

Its XP95 protocol non latching delayed input I have spoken to Clarkson safety services who were not helpful at all
Reply
#2
Do you have a picture of the panel? Usually these things are just a fire alarm with a different sticker on them.
Reply
#3
Whilst Clarkson have traditionally used other manufacturer's rebadged equipment they are part of the French DEF group, which includes system manufacturers as well as lots of service companies - if the photo (if posted) doesn't look like anything familiar it could be by a partner company, links here https://www.reseau-def.com/en/expertises...-incendie/

I's suspect though it's likely to be something from the UK market.
Anthony Buck
Fire Safety Technical Lead @ BAFE SP205 accredited company
Extinguisher specialist

http://www.facebook.com/group.php?gid=65...415&ref=ts
http://www.youtube.com/user/contactacb
http://www.linkedin.com/pub/anthony-buck/22/957/36b
Reply
#4
From what i hear clarksons prefer to make something themselves if possible rather than commission kit from other companies
Reply
#5
(10-03-2020, 03:49 PM)Monkeh Wrote: Do you have a picture of the panel? Usually these things are just a fire alarm with a different sticker on them.

its not a panel its a device that sits on the loop and will run on any panel with Apollo protocol 

I can not seem to add the photo tho
Reply
#6
Attachments need to be small, less than 1mb I think.
I usually just take a screen shot of the picture and that ends up small enough.

Is it doing anything TO the sprinklers , or does it just monitor them?
Reply
#7
(11-03-2020, 08:47 AM)alonso Wrote: From what i hear clarksons prefer to make something themselves if possible rather than commission kit from other companies

I have my doubts about this having the correct certification approvals tbh
Reply
#8
(11-03-2020, 01:25 PM)Monkeh Wrote: Attachments need to be small, less than 1mb I think.
I usually just take a screen shot of the picture and that ends up small enough.

Is it doing anything TO the sprinklers , or does it just monitor them?

it just monitors the flow switch and allows setting of a delay
Reply
#9
If that's all it is then the standard apollo switch monitor will do the same job. The delay might be the only issue depending on the panel but I'm pretty sure with Advanced you can program a delay right into the device from the config tool.
Reply
#10
(11-03-2020, 01:29 PM)Cardy Wrote:
(11-03-2020, 08:47 AM)alonso Wrote: From what i hear clarksons prefer to make something themselves if possible rather than commission kit from other companies

I have my doubts about this having the correct certification approvals tbh

I agree! I was told this by someone who's worked there for 10 years nonetheless.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Delay for Sprinkler Alarm Chris12345 12 1,982 25-06-2019, 07:28 PM
Last Post: Tilly

Forum Jump:


Users browsing this thread: 2 Guest(s)