Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mx pro loop resistance
#1
Hi all, what loop resistance is acceptable on the loops of the mx pro? We have got high resistance message and have lowered the max mA to clear it, just wondered what level brings up this fault? It's the en54 settings, thanks
Reply
#2
(11-03-2020, 07:27 PM)Dayo Wrote: Hi all, what loop resistance is acceptable on the loops of the mx pro? We have got high resistance message and have lowered the max mA to clear it, just wondered what level brings up this fault? It's the en54 settings, thanks

Turn off the EN54
Peter Robinson




07889 038650

Reply
#3
Ditto
http://awacsuk.com

advanced warning and communicated systems
installation...integration...innovation....

any comments or views posted are mine and I'm keeping them.
Reply
#4
(11-03-2020, 07:37 PM)sparky999 Wrote:
(11-03-2020, 07:27 PM)Dayo Wrote: Hi all, what loop resistance is acceptable on the loops of the mx pro? We have got high resistance message and have lowered the max mA to clear it, just wondered what level brings up this fault? It's the en54 settings, thanks

Turn off the EN54

Or leave it on and  set them up properly...…………… ok nobody does that so just turn EN54 off  Biggrin
Reply
#5
Ok, am I missing something? How do I turn it off ?
Reply
#6
(12-03-2020, 12:08 AM)Dayo Wrote: Ok, am I missing something? How do I turn it off ?

Panel settings Bottom left of the screen where you have BST settings, investigation delay etc etc  it’s only on Pro 5 panels
Reply
#7
You can also just do it through the panel, the EN54 option is in the level 3 menu.
Reply
#8
I don't feel as bad now for doing it :)
Reply
#9
I always just set it up?

Its not rocket science
Reply
#10
sorted :-)
but to turn it off you just hit the centre button to turn the tick into a cross, I must be getting old
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Frustrating Loop Open Circuit on Advanced MX5 Pro Dan 8 776 18-11-2019, 12:33 PM
Last Post: Graeme
  Hochiki loop tester alex88 2 1,451 09-02-2018, 12:31 PM
Last Post: MW63
  Autrosafe Loop Fault CourageET 6 6,946 16-01-2011, 11:15 PM
Last Post: sacred
  procyn 2 loop cards K23-020550/2 rev3 DMS 1 2,373 29-07-2010, 07:11 PM
Last Post: Allen Higginson

Forum Jump:


Users browsing this thread: 1 Guest(s)