Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hochiki and Advanced mxpro5 panel
#1
Hi All ,
We usually use apollo detection, but we have a few jobs that want hochiki with advanced mxpro5 panels. The question I have is can we address devices like mcp and smoke detectors up to 126 and the sounder bases from 127 upwards. I know apollo protocol is total 126 on advanced at least until the core protocol is developed.  Also is it best to program the sounders via the handheld programmer or will the panel auto address them. Thanks guys.
Reply
#2
(29-07-2020, 07:30 PM)dcarney Wrote: Hi All ,
We usually use apollo detection, but we have a few jobs that want hochiki with advanced mxpro5 panels. The question I have is can we address devices like mcp and smoke detectors up to 126 and the sounder bases from 127 upwards. I know apollo protocol is total 126 on advanced at least until the core protocol is developed.  Also is it best to program the sounders via the handheld programmer or will the panel auto address them. Thanks guys.

Hochiki addresses are upto 127 and sounders are picked up by the panel I think ages since IO used Hochiki prefer Apollo
Peter Robinson




07889 038650

Reply
#3
The sounder bases will pick up their address during the auto learn from the detector.
When you look at the panel, the sounder attached to device 10 will appear as 10.1 (and 10.2 if it's also a beacon)

Wall mount sounders need to be addressed as 1-127 along with detectors/mcps/modules, it's only the base sounders that will auto address. 

I think if you're replacing a base sounder you have to address it yourself as detector + 127.
Reply
#4
thanks guys good to know
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ziton ZP3 Panel Change Dan 7 345 02-08-2020, 08:15 PM
Last Post: douglas docherty
  Advanced mx4000 networking dcarney 8 1,128 24-06-2020, 03:08 PM
Last Post: davefiresafety
  Help to identify panel davefiresafety 7 552 24-06-2020, 02:48 PM
Last Post: davefiresafety
  Advanced loop card failure Mx5 Pro Dan 9 809 10-06-2020, 06:48 AM
Last Post: bob1
  Aritech UTC fire panel issues dcarney 4 689 27-04-2020, 06:36 PM
Last Post: Graeme
  hochiki and kentec addressing alonso 9 1,919 15-10-2019, 12:30 PM
Last Post: alonso
  Advanced mxpro 4 intermittent open circuit jordanjor 8 1,690 09-10-2019, 04:43 PM
Last Post: MD Martin
  Kentec Synchro hochiki Loop Explorer Software jmsa7 3 3,624 05-10-2019, 09:17 PM
Last Post: Ali Sulaiman
  EM Vents - Advanced MxPro5 Next4467 7 1,829 29-08-2019, 02:30 PM
Last Post: Next4467
  Advanced disablement via keyswitch input alonso 2 934 30-07-2019, 06:50 PM
Last Post: Mr C

Forum Jump:


Users browsing this thread: 2 Guest(s)