Thread Rating:
  • 120 Vote(s) - 2.99 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Minerva Marine T1008 Fire Panel Manual needed
#1
Wondered if any one could help me. I need an installation/engineers manual for a Minerva Marine T1008 Fire Panel.
We have just taken over the maintenance of a nursing home and need to adapt the doorlocking system to tie in with the fire alarm panel.
Any help would be appreciated ,

thanks.
Reply
#2
its just an nt panel mate, simple you have 8 outputs on left side of pcb those are your outputs just use the normally closed and put the door lock through that.
Reply
#3
only give out user manual for it, explain a bit


Attached Files
.pdf   t1000usr.pdf (Size: 397.06 KB / Downloads: 3,904)
Reply
#4
Thanks for the quick replies,user manual very informative, and have been in contact with Tyco who emailed me an installation manual.
We have been asked to interface the door entry system , 12 volts, to the fire alarm panel, 24 volts, so that when a full alarm situation occurs all the door locks open. Have done it numerous times with standard panels but not worked with a Minerva Marine panel before.
Thanks again.
Reply
#5
yeah so you take the 12v from the door system through normally closed and common contact on fire panel, then when fire panel goes, contact changes opening doors. the panel is standard its a conventioanl fire panel. if you look at the pcb when you open it the panel there will be two sets up relay contacts

most systems if its s network door entry it just needs short or a open voltage free, over the fire contact on the door entry panel, fire relay goes shorts or opens the link and all the doors release.

you can't run the door entry system off the fire alarm sounder outputs if thats what you mean by the 24v. its not allowed.


what door entry system is it?
Reply
#6
I'm still trying to find more marine manuals as we do get a lot asking
Reply
#7
Quite a versatile panel but prone to powers supplies going down.
Reply
#8
Thanks for all the replies.
I now have the Minerva Marine T1008 Installation Manual, and would be happy to email it to anyone who keeps this sort of info en mass.
just let me know where to send it.
Reply
#9
can you send me a copy to post in the engineers section

steve@firealarmengineers.com
Reply
#10
contractor999 Wrote:Thanks for all the replies.
I now have the Minerva Marine T1008 Installation Manual, and would be happy to email it to anyone who keeps this sort of info en mass.
just let me know where to send it.

Any chance of a copy please? we look after a few of these but I only have a well worn paper copy.
Cheers
John.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ADT minerva mzx125 Clarkie 0 79 24-02-2017, 12:33 PM
Last Post: Clarkie
  Wiring open collector of fire panel gherasim 19 435 13-02-2017, 06:46 PM
Last Post: Monkeh
  Fire panel output types gherasim 7 308 01-02-2017, 08:18 AM
Last Post: gherasim
  Fire Alarm Control Panel -- Reliability of Function - Guess Fire-Sal 16 947 30-01-2017, 08:44 PM
Last Post: designguru
  low output vesda fault from vesda panel sammyunique 10 618 22-01-2017, 01:06 PM
Last Post: SergeTL
  Advanced MX4 Panel Fault Kennedy0121 7 576 08-12-2016, 05:39 PM
Last Post: Monkeh
  Adt mzx panel codes for port talbot/south wales alonso 1 325 17-11-2016, 06:05 PM
Last Post: mark_man20
  C-Tec Panel atherton1930 7 659 08-11-2016, 03:04 PM
Last Post: atherton1930
  Ziton ZP3 Panel won't connect cjam 28 7,448 02-11-2016, 12:28 AM
Last Post: gary@sonicfs
  Sigam XT Extinguishant Control Panel K11031m2 jmsa7 7 539 28-10-2016, 10:30 PM
Last Post: jmsa7

Forum Jump:


Users browsing this thread: 1 Guest(s)