Thread Rating:
  • 65 Vote(s) - 2.88 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Algo-Tec 6300 manual
#1
Hi Guys,

Looking for a service/Maintenance manual for a Protec Algo-Tec 6300 Fire Alarm Panel, Not come across this panel before are they easy to work with? do i require software like the morley zx series?

Cheers in adavance
Shane.
SafeTec
Reply
#2
no software available protec only and manual is on protec site
Reply
#3
Thanks for reply Hothead, Yea i had a look at them and i cant see anything in relation to putting a system ? zone on test ( maybe im missing something.) seems to be basic manuals for users. is there an engineers manual?
Reply
#4
Just dig through the menu on the panel, zone test should be in there. Unless it's a really old one.
Reply
#5
The menu is walk test and you can only do one zone at a time unless an old 6300 ( can normal tell when you look inside is the 0 volts linked to the earth block if so need an engineers code
Reply
#6
(29-08-2016, 04:10 PM)hothead Wrote: The menu is walk test and you can only do one zone at a time unless an old 6300 ( can normal tell when you look inside is the 0 volts linked to the earth block if so need an engineers code

Only going to the site tomorrow, so was only informed panel make today. do you have an engineers code in case required!?
Reply
#7
Changes every 3-6 months i believe

All views expressed are mine and mine alone.... Bring me Back my Views!!!! There Not Yours !!!!!!


Reply
#8
(29-08-2016, 04:33 PM)ei0675 Wrote:
(29-08-2016, 04:10 PM)hothead Wrote: The menu is walk test and you can only do one zone at a time unless an old 6300 ( can normal tell when you look inside is the 0 volts linked to the earth block if so need an engineers code

Only going to the site tomorrow, so was only informed panel make today. do you have an engineers code in case required!?

Try some of these codes 



NO CODES IN THE PUBLIC AREA!!!!

 might help
Reply
#9
An95 codes certainly wont work with the new gear

All views expressed are mine and mine alone.... Bring me Back my Views!!!! There Not Yours !!!!!!


Reply
#10
This is the public area - the codes need removing and the usual message repeating (again)
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SMS Sentri4 commissioning manual Harrysu 1 1,345 12-01-2020, 04:34 PM
Last Post: Harrysu
  ADT MX1000 Service manual Daubney 7 10,849 15-07-2018, 09:42 PM
Last Post: AWOLB7
  Ziton Maestro Installation & Commissioning Manual mustak 12 11,170 16-11-2017, 03:40 PM
Last Post: Chris M.
  Mxc202pu user and programming manual alonso 5 5,678 15-11-2017, 01:37 PM
Last Post: sweetynkem
  Protec 6300 Intefire 35 48,601 16-09-2017, 08:15 PM
Last Post: hothead
  Zettler MZX 250 / Tyco Minerva MZX User manual wanted Dave Neeson 5 5,394 03-09-2017, 07:52 PM
Last Post: Dave Neeson
  Menvier mf9308 Engineers Manual avcctv 5 13,811 03-06-2016, 07:28 PM
Last Post: AnthonyB
  RAFT radio system - manual and software ESP 11 9,660 13-12-2015, 08:59 PM
Last Post: Garsec
  It's a long shot...manual wanted micklou 4 5,055 08-02-2015, 12:34 AM
Last Post: sparky999
  Please help with a manual coruptiealin 7 8,484 01-10-2014, 01:16 AM
Last Post: Ghostrider

Forum Jump:


Users browsing this thread: 1 Guest(s)